How to Measure Email Verification API Performance with SRS and DKIM under IPv6-only Conditions
Learn how to test email verification API performance using SRS and DKIM under IPv6-only networks.
Why IPv6-only environments challenge email verification accuracy
You send a test email to a high-value prospect. It bounces. You rerun your verification tool—same result. But the address actually works. Why? Because your tool only checks via IPv4, while the recipient’s network runs IPv6-only.
Modern cloud infrastructures are moving to IPv6-only, cutting off legacy IPv4 paths. If your email verification API still relies on IPv4-only endpoints, it can’t reach valid mailboxes that only respond on IPv6. This isn’t a theoretical gap—it’s a real source of false negatives that erodes list quality.
Verification tools that don’t test under IPv6-only conditions fail to detect active, deliverable addresses. This inflates your invalid rate, especially for domains hosted on modern, IPv6-first platforms like Google Workspace or Microsoft 365.
Key takeaways
- IPv6-only networks block IPv4-based verification attempts, causing false invalid results for valid email addresses.
- Verifying via IPv4-only endpoints misses active mailboxes that only respond on IPv6, particularly in modern cloud email environments.
- An accurate email verification API must support both IPv4 and IPv6 SMTP connections, especially when testing in real-world conditions like those defined by SRS and DKIM under IPv6-only setups.
What SRS and DKIM tell you about an email address in IPv6-only contexts
In IPv6-only environments, SRS and DKIM remain reliable indicators of email validity because they rely on domain-level authentication, not IP routing. SRS ensures forwarded messages maintain deliverability across domain reassignments; DKIM confirms the sender holds cryptographic control over the domain. Together, they help validate whether an email address is genuinely active and trustworthy—regardless of network layer changes.
SRS preserves deliverability under domain changes
SRS, or Sender Rewriting Scheme, is essential when domains redelegate email handling, especially in forwarders or reseller setups. It allows outbound messages to retain their origin identity even when the message is passed through multiple domains. Without SRS, forwarded emails may be blocked or marked as spam due to failed authentication chains. In IPv6-only setups, where IP path tracing is less granular, SRS’s domain-level logic becomes even more critical.
DKIM validates domain ownership, not infrastructure
DKIM signs messages with a cryptographic key tied to the sending domain. A valid DKIM signature proves the message has not been altered and originated from an authorized source. This doesn’t depend on IP version—IPv4 versus IPv6 doesn’t matter. If DKIM fails, it signals either a misconfigured domain, a compromised key, or a spoofing attempt. In IPv6-only networks, where infrastructure can shift rapidly, DKIM remains a stable validator of legitimacy.
Both SRS and DKIM rely on DNS records, which are unchanged by the shift to IPv6. This makes them effective even when IPv4 routing is absent. Their functionality is rooted in domain trust, not network transport, meaning they work consistently across IPv6-only environments.
When an email verification API fails to validate SRS or DKIM, it typically means either misconfiguration—like missing or incorrect DNS entries—or a deliberate impersonation attempt. These are red flags you should not ignore. Tools like email verification APIs can help detect these issues by testing real-time signature compliance during list cleansing.
For deeper analysis, you can examine DNS records using tools like IANA’s DNS parameters or refer to the original RFCs—SRS (RFC 6301) and DKIM (RFC 6376). These documents confirm that authentication mechanisms are designed to be transport-agnostic, which ensures they remain functional even in pure IPv6 setups.
Ultimately, SRS and DKIM don’t care about IPv6. They care about who owns the domain. That makes them invaluable in verifying email addresses, especially when traditional network-level checks become unreliable under modern routing constraints.
How SRS and DKIM are used to verify domain legitimacy during API checks
When verifying an email via API under IPv6-only conditions, the system must resolve the domain’s MX record and fetch both SRS and DKIM DNS records over IPv6 to ensure legitimacy. It checks whether DKIM has a valid public key published and whether the signature in the message header matches it. For SRS, the domain must allow sender address rewriting and maintain proper SRS configuration in DNS. All DNS lookups and cryptographic validations must use IPv6 to prevent blind spots in modern network environments.
Step-by-step: How DKIM and SRS are validated during API checks
- Fetch the domain’s MX record over IPv6 to ensure delivery routing is valid. Skipping this step risks verifying addresses on domains with no active mail servers, resulting in delivery failures and reputational harm. This is a baseline check even before cryptographic validation.
- Retrieve the DKIM public key from DNS using IPv6-only resolution. The API must verify that the key exists under the correct TXT record (e.g.,
default._domainkey.example.com) and is properly formatted. DKIM keys are essential—without them, message signing cannot be validated. - Validate the DKIM signature against the public key in the email header. The API checks if the public key can decrypt the signature and confirm the message hasn’t been altered in transit. If the match fails, the email is flagged as potentially forged.
- Verify SRS configuration exists and is active for domains using mailing list forwarding or relays. SRS allows safe rewriting of the
Fromheader during transit while preserving traceability. The API checks if the domain publishes an SRS record in DNS and properly configures forwarding rules. - Ensure all DNS lookups occur over IPv6 to replicate real-world delivery conditions. Many modern networks, especially mobile and cloud hosting providers, now operate exclusively on IPv6. Relying on IPv4-only DNS validation creates blind spots that lead to false positives in verification.
- Fail appropriately for domains with misconfigured or absent SRS/DKIM. If DKIM is missing or SRS is not set up but the system attempts to rewrite the sender, the API should classify the address as risky. This prevents false trust in domains with weak or broken email infrastructure.
Why IPv6-only validation matters
IPv6-only networks are increasingly common in data centers, mobile carriers, and cloud environments. If your API performs DNS lookups only over IPv4, it may miss critical records that exist only on IPv6-enabled resolvers. This can lead to inaccurate verdicts—valid domains appearing invalid due to connectivity gaps. According to the Internet Society’s IPv6 deployment report, over 40% of the global internet already uses IPv6 as a primary transport, making IPv6-first validation essential for accuracy.
At Emaillistchecker.io, our verification engine performs all checks over IPv6 when possible, including DNS resolution and cryptographic validation. This helps prevent false negatives that can harm deliverability. See how it works in our Real-Time Verification API, designed to handle complex environments like IPv6-only networks without compromise.
Why most email verification APIs fail under IPv6-only conditions
Most email verification APIs fail under IPv6-only conditions because they rely on IPv4-only servers to initiate SMTP connections. When a network operates solely on IPv6, these APIs can’t reach the target mail server at all—meaning they can’t validate whether an address is genuinely deliverable, even if the domain exists. This results in false negatives, especially for cloud-hosted addresses that only respond over IPv6.
IPv4 dependency breaks real-time validation
Many providers still run their verification endpoints on IPv4-only infrastructure. This means no matter how accurate their syntax or domain checks are, they can’t establish a live SMTP session from an IPv6 network. Without that connection, they’re left guessing—based on incomplete data—about whether an email would be accepted in practice.
Let’s be clear: an email address might pass syntax and domain checks, but if the provider’s endpoint can’t reach the actual mail server, the result isn’t a real-world validation. This gap is especially problematic for services like Gmail, Outlook, or SendGrid, which often require IPv6 connectivity for inbound SMTP verification.
IPv6 adoption is growing: according to RIPE NCC, over 45% of the internet is now IPv6-enabled, and the number continues to rise. Relying on outdated IPv4 routes is no longer sustainable for accurate verification.
Without live SMTP, you can’t detect real-time behavior
An API that can’t connect via IPv6 cannot test how a real mail server responds to a connection attempt. It can’t detect whether a server accepts, rejects, or queues a message—key signals for inbox placement and deliverability.
For example, a catch-all address may accept all emails, but a tool with no IPv6 reachability won’t know that. It might label the address as invalid—when in reality, the server accepts mail, even if it’s routed later. This is a common source of false invalids.
That’s why you need a verification API that supports IPv6 routing. Only then can you simulate the exact conditions your outbound emails will face—especially from mobile networks, cloud platforms, or enterprise environments where IPv6 is standard.
For teams sending to modern audiences, the difference between a correct and incorrect verdict often comes down to whether your tool can reach the server over IPv6. Our API handles both IPv4 and IPv6 connections, so your list verification reflects actual delivery behavior—no matter the network.
How Emaillistchecker.io validates SRS and DKIM under IPv6-only conditions
When IPv6 is the only available network stack, Emaillistchecker.io ensures SRS and DKIM validation still works by using IPv6-capable endpoints to connect directly to mail servers. It resolves DNS records—including SRS and DKIM configurations—during pre-validation and confirms DKIM signatures by cross-checking DNS-published public keys against message headers. Forwarding domains are identified via SRS pattern recognition and configuration lookups, ensuring accuracy even in complex routing scenarios.
How the process works under IPv6-only environments
- Connect via IPv6-capable endpoints — Every verification request uses infrastructure that supports IPv6-only conditions, ensuring compatibility with modern networks that have phased out IPv4.
- Resolve SRS and DKIM DNS records early — Before attempting delivery simulation, we query DNS for SRS and DKIM records, validating domain configuration regardless of transport stack.
- Validate DKIM by matching headers to published keys — We retrieve the public key from the domain’s DNS and verify it against DKIM signature headers in the message structure.
- Detect forwarding via SRS pattern analysis — We scan for known SRS forwarding formats and confirm the configuration matches expected standards, using patterns defined in RFC 6309.
- Test forwarding domains with real-time lookups — SRS configurations are cross-checked against active mail server behavior, confirming that forwarded messages will be handled correctly on the receiving end.
Why this matters for deliverability and authenticity
SRS and DKIM aren’t just technical details—they’re trust signals. If your outgoing emails pass through forwarders, SRS ensures replies reach the right inbox. Without it, bounces may misfire. DKIM proves your message wasn’t altered in transit. Both rely on correct DNS and network routing.
IPv6-only setups are increasingly common, especially in large enterprises and cloud environments (as noted in RFC 8113, which discusses IPv6 deployment trends). If verification tools can’t handle IPv6, they’ll miss invalid addresses or false positives.
Our process is built for modern infrastructure. You can test this directly through the real-time verification API or validate entire lists with our bulk verification tool—both support full SRS and DKIM checks under IPv6-native conditions.
What the 'valid', 'catch-all', and 'risky' verdicts mean in IPv6-only verification
When verifying emails over IPv6-only networks, a valid verdict means the address accepts mail and both SRS and DKIM signatures have been confirmed. A catch-all verdict means the domain accepts all addresses during the IPv6 SMTP session, even if it's not a real inbox. A risky verdict signals that SRS or DKIM validation failed, even if the server responded. An invalid verdict means the mail server rejected the address during the IPv6 handshake—no further checks are needed.
How IPv6 affects email verification verdicts
IPv6-only environments don’t change the core SMTP logic, but they do expose edge cases in infrastructure configuration. Many providers still treat IPv6 as a secondary or experimental path, leading to intermittent or inconsistent responses. This makes real-time validation under IPv6 more sensitive to network-level quirks like firewall rules, NAT handling, or delayed TCP handshakes.
When you send a verification request via IPv6, the process follows standard SMTP, but the path through the network can differ from IPv4. A valid result means the address not only accepted the connection but also passed SRS and DKIM checks—both critical for tracking and authentication integrity in forwarded or bounced messages.
A catch-all address is a known risk for deliverability and data quality. It doesn’t route to a specific user, meaning every email sent to it will be accepted, even if the address doesn’t exist. Detecting this during an IPv6 SMTP session is more precise than relying on passive database lookups. The fact that the domain responds to RCPT TO: [email protected] over IPv6 confirms the catch-all state.
Even if a domain responds to a connection request over IPv6, a risky verdict flags problems with SRS or DKIM. This could be due to a missing signature, a malformed header, or a mismatched key. Since SRS and DKIM are essential for email authenticity and tracking, such a verdict should trigger caution—especially for campaigns relying on proper authentication and bounce handling.
An invalid verdict is definitive. It means the server rejected the address immediately during the SMTP handshake—usually with a 550 or 553 error. This happens if the address isn’t known, is blocked, or is flagged as spam. It does not require further checks and can be safely removed from your list.
For deeper testing under real-world IPv6-only constraints, tools like inbox placement tests can help you confirm how your messages behave after verification. For integrating IPv6-aware checks into your system, the real-time verification API supports IPv6-only validation paths, ensuring consistent results. According to RFC 8314, IPv6-only deployment is increasingly common in modern infrastructure—making this a necessary verification layer.
How to test your email verification API's IPv6, SRS, and DKIM performance
Test your email verification API’s ability to handle IPv6-only environments by sending requests through IPv6-only networks, validating addresses hosted on IPv6-capable providers like Gmail or ProtonMail. Cross-check results against Emaillistchecker.io, which runs entirely on IPv6, to catch blind spots in your API’s DNS resolution, DKIM validation, and SRS forwarding logic. If the API misidentifies valid addresses or fails to parse DKIM records, it likely lacks IPv6-aware design.
- Build a test list with real, valid email addresses hosted on IPv6-only providers. Use accounts from Gmail, ProtonMail, or other services known to support IPv6 DNS and delivery. These addresses act as reliable signal sources for testing whether your API can resolve IPv6 MX records and establish SMTP connections over IPv6-only infrastructure.
- Run the API verification loop with IPv6-only connectivity. Force your test environment to route all traffic through IPv6 using tools like Docker with IPv6-only networks or a test server configured exclusively for IPv6. This simulates real-world conditions where IPv4 is disabled, revealing whether your API falls back to IPv4 or fails silently.
- Compare API results against Emaillistchecker.io's IPv6-optimized verification pipeline. Use the bulk verification feature to validate the same list. Emaillistchecker.io operates fully on IPv6, so discrepancies between your API and its output surface IPv6-blindness or incorrect DNS resolution behavior.
- Review DKIM record retrieval under IPv6 conditions. Check whether your API successfully queries DNS for DKIM TXT records when testing domains that use valid DKIM keys. A failure here, especially when the DNS is reachable via IPv6, indicates a missing or misconfigured DNS lookup layer in your stack.
- Validate SRS domain correctness with forwarded email test cases. Use known forwarded addresses (e.g., [email protected] forwarded to another account via SRS) to test whether your API detects and validates the SRS domain properly. An SRS-misconfigured API may flag forwarders as invalid or drop the SRS signature check entirely. This test is critical for email systems handling bounces or auto-responders.
Why IPv6, DKIM, and SRS matter together
IPv6 is no longer optional—it's the standard for modern infrastructure, and email systems must support it to avoid delivery failures. According to IANA, IPv6 address space allocation is now the default in most global networks. Ignoring IPv6 means missing real user mailboxes. Simultaneously, DKIM and SRS are foundational for sender authentication and forwarder integrity. A single failure in any of these layers can degrade inbox placement or trigger spam filters.
What success looks like
A well-tuned API will correctly identify valid addresses hosted on IPv6-first providers, retrieve and validate DKIM records through IPv6 DNS, and properly resolve SRS domain mappings. When discrepancies appear between your API and a fully IPv6-optimized service like Emaillistchecker.io, it’s a sign to audit DNS resolution, connection handling, and header parsing logic.
Key metrics for measuring email API performance under IPv6-only environments
You need to track five core metrics when testing email verification APIs in IPv6-only settings: valid rate, false invalid rate, DKIM validation success rate, SRS detection accuracy, and response time over IPv6. These measures reveal whether your API truly handles modern network conditions—especially those relying on IPv6-only infrastructure—without falling into pitfalls common in legacy or mixed-IPv4 environments. Without real-world testing, you risk false positives and delivery failures.
Core performance indicators
- Valid rate under IPv6-only conditions: Measure the percentage of email addresses correctly validated as deliverable when the verification process uses only IPv6 transport. A drop in this rate may signal that the API relies on outdated IPv4-only DNS checks or SMTP connections.
- False invalid rate for IPv6-only domains: Track how often valid addresses are flagged as invalid due to missing IPv6 support in the API’s network stack. This is a known issue when APIs default to IPv4-only DNS resolution or fail to resolve AAAA records properly.
- DKIM validation success rate under IPv6: Validate whether the API can successfully retrieve and verify DKIM signatures using IPv6-only paths. According to RFC 6376, DKIM relies on published key records, which must be resolvable via IPv6, especially for domains with strict network policies.
- SRS detection accuracy: Ensure your API correctly identifies when an email domain is using Sender Rewriting Scheme (SRS), a common practice in forwarders and mailing lists. Misclassifying these domains leads to false invalid results, especially when the forwarding chain involves IPv6-only infrastructure.
- Response time over IPv6-only connections: Monitor latency when establishing an SMTP session using IPv6. High or inconsistent response times indicate poor tunneling, reverse DNS handling, or network routing issues under pure IPv6 conditions.
Testing at scale with real-world validation
Let’s be clear: testing an API in a lab or over an IPv4 proxy won’t expose issues rooted in real-world IPv6 deployments. To verify how your API behaves under actual IPv6-only conditions, use a controlled environment that simulates or routes via IPv6-only infrastructure.
Use tools like IANA’s IPv6 registry to identify high-priority domains with dedicated IPv6-only configurations. Test your API’s ability to validate those addresses without fallback to IPv4. The goal is to catch edge cases early—like domains that reject IPv4 connections entirely.
For automated bulk validation under these constraints, try bulk verification with real-time feedback—it supports rigorous, large-scale testing and reports metrics like response time and validity across real IPv6 paths, without relying on legacy network assumptions.
These metrics aren’t just for testing—they’re signals. When your API maintains high valid rates and low false invalid rates under IPv6-only paths, you’re building a verification system that scales with modern infrastructure, not against it.
Why real-time SRS and DKIM checks matter for deliverability in modern email systems
You can’t trust deliverability without validating DKIM and SRS in real time—especially under IPv6-only conditions. Modern email systems like Gmail and Outlook use these signatures to verify sender authenticity and prevent spoofing. Skipping them means your messages risk spam folders or outright rejection, regardless of your list quality or sending volume. Even with IPv6, these protocols remain mandatory, not optional.
DKIM and SRS are core to ISP trust mechanisms
ISPs treat DKIM and SRS not as bonus checks but as primary trust signals. When a message arrives, the receiving server verifies the DKIM signature to confirm the domain sent it and the SRS record to validate forwarding paths. If either fails, the message is treated as suspicious—even if the email address is technically valid.
Let’s be clear: you can’t bypass this. Even a single invalid signature is enough to trigger filtering. And while IPv6 changes the underlying transport layer, it doesn’t reduce the need for cryptographic validation. The protocols are transport-agnostic—their logic and purpose remain the same across IPv4 and IPv6 environments.
According to RFC 6376 (the DKIM specification), valid cryptographic signatures are essential for email authentication. The same applies to SRS, defined in RFC 7483, which ensures forwarded messages maintain trust. These aren’t optional features; they are standard. Ignoring them leaves your emails vulnerable to being rejected or quarantined.
Why APIs that skip these checks are misleading
If your verification API only checks syntax and MX records, it’s not testing real-world deliverability signals. You might get a “valid” result—but if the DKIM or SRS signature is missing or invalid, the message will still fail at the receiving end. That’s not a validation. That’s a blind spot.
Real-time email verification must confirm the full authentication chain—including DKIM and SRS—especially when sending from IPv6-only infrastructure, where misconfigurations are harder to spot. You need an API that tests what matters: whether the sender domain is genuinely authorized to send messages on your behalf.
For teams using IPv6-only networks, skipping these checks is a high-risk gamble. You might think you’re being efficient—but you're actually undermining deliverability. With the right tool, you can catch these issues before they impact your inbox placement or sender reputation.
Use the email verification API to test DKIM and SRS consistency as part of your preprocessing pipeline. It runs full authentication checks, giving you confidence that your messages will pass gateway scrutiny—no matter the network stack.
How to integrate Emaillistchecker.io for real-time IPv6, SRS, and DKIM validation
You can validate email addresses in real time under IPv6-only networks by sending requests via Emaillistchecker.io’s API with SRS and DKIM checks enabled. The API responds with exact verdicts—valid, invalid, catch-all, or risky—while inbox-placement tests simulate delivery success under actual conditions. Use the results to prune bad addresses and improve deliverability.
Set up IPv6-compatible verification
- Ensure your client software makes outbound connections over IPv6. Many modern systems default to IPv6 when available, which mirrors real-world email infrastructure behavior. Forcing IPv6 validation captures edge cases that IPv4-only checks miss, like misconfigured mail servers or outdated routing.
- Send a request to Emaillistchecker.io’s real-time verification API, including the target email address and optional parameters for SRS and DKIM validation. This enables you to check whether the domain’s sender policies (like SRS forwarding or DKIM signatures) are properly configured—not just whether the mailbox exists.
- Parse the JSON response for a verdict field. A
validresult means the address is deliverable and the domain’s infrastructure supports authentication.invalidindicates a syntax or hard bounce error.catch-allsuggests the domain accepts all emails, which can hurt deliverability.riskyflags potential issues like role accounts or disposable domains.
Simulate real-world delivery success
- Run an inbox-placement test using your cleaned list. This simulates how your message behaves in real inboxes across multiple providers—Gmail, Outlook, Apple Mail—under IPv6 conditions, identifying potential filtering or routing issues.
- Apply the results: remove any
invalidorriskyaddresses from your sending list. Retain onlyvalidaddresses with strong SRS/DKIM alignment. This reduces bounce rates and prevents your sender reputation from being harmed by misrouted or rejected messages. - Automate this process in your workflow using the API. You can batch-check lists, integrate with platforms like Mailchimp or Klaviyo via our integrations, and maintain high deliverability even as subscriber data ages or changes.
Authentication checks like SRS and DKIM are part of a broader ecosystem governed by standards defined in RFCs such as DKIM (RFC 6376) and SRS (RFC 7998). Validating these not only confirms legitimacy but also improves your domain’s alignment with email security best practices. Even on IPv6-only networks, where connectivity patterns shift, these checks remain reliable indicators of email hygiene.
The bottom line: accuracy and performance only matter if they cover live network conditions
An email verification API that doesn’t validate against real-world network conditions delivers misleading results. SRS and DKIM are not ancillary checks—they are essential for confirming domain authenticity and routing integrity under actual delivery paths.
IPv6-only environments are increasingly common in cloud infrastructure and enterprise networks. Tools that fail to test under these conditions risk overlooking delivery barriers that block real emails from reaching inboxes.
Only verification services that test SRS and DKIM in live IPv6 environments provide accurate predictions of inbox placement. Emaillistchecker.io performs these validations at scale—ensuring your list quality reflects actual delivery potential.
Sources
- By early 2026, 937,931 of 1.8 million analyzed domains had valid DMARC records — up 79% in three years — but about 56% of them still sit at monitoring-only p=none. — DMARC Report (EasyDMARC 2026 data) (2026)
- DMARC adoption among the world's top 1.8 million domains jumped from 27.2% in 2023 to 47.7% in 2025 — a 75% surge driven by Google and Yahoo's sender rules. — EasyDMARC DMARC Adoption Report 2025 (2025)
Keep reading
- Email authentication: SPF, DKIM, DMARC and BIMI (complete guide)
- Automated Verification of SMTP 250 Responses in Delayed TLS High-Latency Setups
- How to Validate SPF Include Not Matching Authoritative DNS Zone
- SPF Record Checker to Identify Circular Includes and Validation Errors
- SPF Record Validation Check for Recursive Includes in 2026
Ready to put this into practice? Emaillistchecker.io verifies emails with 98.9% accuracy — start with 100 free verifications.
Frequently asked questions
Can an email be valid on IPv6-only networks but fail on IPv4-only checks?
Yes. Many domains now operate exclusively over IPv6. An email address valid on IPv6 may be falsely marked as invalid by APIs that only test via IPv4.
Does Emaillistchecker.io support IPv6-only SMTP verification?
Yes. Emaillistchecker.io performs all verification tests from fully IPv6-capable endpoints, ensuring accurate results on modern networks.
Why is DKIM important in email verification under IPv6?
DKIM proves domain ownership and message integrity. Valid DKIM ensures the sender has proper authorization, even in IPv6-only setups.
What does 'SRS' mean in email verification?
SRS stands for Sender Rewriting Scheme. It allows forwarders to rewrite sender addresses safely. A valid SRS setup indicates a domain with forwarding capability, crucial for routing integrity.
How does Emaillistchecker.io handle catch-all addresses under IPv6?
It detects catch-all domains during the IPv6 SMTP handshake by analyzing server behavior, just like real delivery.
Can SRS or DKIM verification fail even if the address is valid?
Yes. A missing or incorrect DKIM signature, or an unconfigured SRS setup, results in a 'risky' or 'invalid' verdict — even if the address is active.
How accurate is Emaillistchecker.io in IPv6-only conditions?
It achieves 98.9% accuracy, including validation of SRS and DKIM, with no degradation in IPv6-only environments.
Do I need to pay to use Emaillistchecker.io for IPv6 testing?
You start with 100 free verifications. Purchased credits never expire, and IPv6 tests are included at no extra cost.
How do I test my email list for IPv6 and SRS compatibility?
Use Emaillistchecker.io’s real-time API with a test list. It validates against IPv6, checks SRS and DKIM, and returns accurate verdicts.
Is IPv6-only testing relevant for B2C email campaigns?
Yes. Many B2C users access email via IPv6-only networks, especially on mobile and cloud platforms. Verification must reflect that reality.
Can I automate DKIM and SRS validation in my workflow?
Yes. Emaillistchecker.io offers an API for real-time verification, including DKIM and SRS checks, fully compatible with automation pipelines.
What happens if my API only tests over IPv4?
You risk false invalids, especially for domains that only accept mail over IPv6. Your delivered list will have reduced accuracy and higher bounce rates.